How to fix the Runtime Code 2775 Microsoft Access Error 2775

Symptoms of Code 2775 - Microsoft Access Error 2775

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of Microsoft Access Error 2775 - Code 2775

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2775 (Microsoft Access-Fehler 2775) - Sie haben in der Visual Basic-Prozedur zu viele Argumente angegeben, oder es ist nicht genügend Arbeitsspeicher zum Ausführen der Prozedur vorhanden.@Geben Sie weniger Argumente an oder schließen Sie nicht benötigte Programme und versuchen Sie dann erneut, die Prozedur auszuführen.Weitere Informationen zum Freigeben von Arbeitsspeicher finden Sie unter Suchen
Come fissare Errore 2775 (Errore di Microsoft Access 2775) - Hai specificato troppi argomenti nella procedura di Visual Basic o non c'è abbastanza memoria per eseguire la procedura.@Specificare meno argomenti o chiudere i programmi non necessari, quindi provare a eseguire di nuovo la procedura.Per ulteriori informazioni su come liberare memoria, cercare
Hoe maak je Fout 2775 (Microsoft Access-fout 2775) - U hebt te veel argumenten opgegeven in de Visual Basic-procedure of er is niet genoeg geheugen om de procedure uit te voeren.@Specify minder argumenten of sluit onnodige programma's en probeer de procedure opnieuw uit te voeren. Zoek voor meer informatie over het vrijmaken van geheugen
Comment réparer Erreur 2775 (Erreur Microsoft Access 2775) - Vous avez spécifié trop d'arguments dans la procédure Visual Basic, ou il n'y a pas assez de mémoire pour exécuter la procédure.@Spécifiez moins d'arguments ou fermez les programmes inutiles, puis réessayez d'exécuter la procédure.Pour plus d'informations sur la libération de mémoire, recherchez
어떻게 고치는 지 오류 2775 (마이크로소프트 액세스 오류 2775) - Visual Basic 프로시저에서 너무 많은 인수를 지정했거나 프로시저를 실행하기에 메모리가 충분하지 않습니다.@더 적은 인수를 지정하거나 불필요한 프로그램을 닫은 다음 프로시저를 다시 실행해 보십시오. 메모리 확보에 대한 자세한 내용은 검색
Como corrigir o Erro 2775 (Erro 2775 do Microsoft Access) - Você especificou muitos argumentos no procedimento do Visual Basic ou não há memória suficiente para executar o procedimento. @ Especifique menos argumentos ou feche programas desnecessários e tente executar o procedimento novamente. Para obter mais informações sobre como liberar memória, pesquise
Hur man åtgärdar Fel 2775 (Microsoft Access-fel 2775) - Du har angett för många argument i Visual Basic -proceduren, eller så finns det inte tillräckligt med minne för att köra proceduren.@Ange färre argument, eller stäng onödiga program, och försök sedan köra proceduren igen.För mer information om frigöring av minne, sök
Как исправить Ошибка 2775 (Ошибка Microsoft Access 2775) - Вы указали слишком много аргументов в процедуре Visual Basic или недостаточно памяти для запуска процедуры. @ Укажите меньше аргументов или закройте ненужные программы, а затем попробуйте запустить процедуру еще раз. Для получения дополнительных сведений об освобождении памяти выполните поиск
Jak naprawić Błąd 2775 (Błąd Microsoft Access 2775) - Określiłeś zbyt wiele argumentów w procedurze Visual Basic lub nie ma wystarczającej ilości pamięci do uruchomienia procedury.@Podaj mniej argumentów lub zamknij niepotrzebne programy, a następnie spróbuj ponownie uruchomić procedurę.Aby uzyskać więcej informacji na temat zwalniania pamięci, wyszukaj
Cómo arreglar Error 2775 (Error de Microsoft Access 2775) - Especificó demasiados argumentos en el procedimiento de Visual Basic o no hay suficiente memoria para ejecutar el procedimiento. @ Especifique menos argumentos o cierre programas innecesarios y luego intente ejecutar el procedimiento nuevamente. Para obtener más información sobre cómo liberar memoria, busque

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: