How to fix the Runtime Code 2723 The | object doesn't support the attempted operation

Symptoms of Code 2723 - The | object doesn't support the attempted operation

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The | object doesn't support the attempted operation - Code 2723

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2723 (Die | Objekt unterstützt den versuchten Vorgang nicht) - Die | -Objekt unterstützt den versuchten Vorgang nicht.@Das OLE-Objekt wurde in ein Bild geändert oder die Verknüpfung zum Objekt wurde unterbrochen.@Wenn Sie den Vorgang ausführen möchten, löschen Sie das OLE-Objekt und betten Sie es erneut ein oder verknüpfen Sie es erneut. @1@1@9360@1.
Come fissare Errore 2723 (Il | l'oggetto non supporta l'operazione tentata) - Il | l'oggetto non supporta l'operazione tentata.@L'oggetto OLE è stato modificato in un'immagine o il collegamento all'oggetto è stato interrotto.@Se si desidera eseguire l'operazione, eliminare l'oggetto OLE, quindi incorporarlo o collegarlo di nuovo. @1@1@9360@1.
Hoe maak je Fout 2723 (de | object ondersteunt de poging tot bewerking niet) - de | object ondersteunt de poging tot bewerking niet.@Het OLE-object is gewijzigd in een afbeelding of de koppeling naar het object is verbroken.@Als u de bewerking wilt uitvoeren, verwijdert u het OLE-object en sluit u het vervolgens in of koppelt u het opnieuw. @1@1@9360@1.
Comment réparer Erreur 2723 (Le | l'objet ne prend pas en charge l'opération tentée) - Le | l'objet ne prend pas en charge l'opération tentée.@L'objet OLE a été transformé en image ou le lien vers l'objet a été rompu.@Si vous souhaitez effectuer l'opération, supprimez l'objet OLE, puis incorporez-le ou liez-le à nouveau. @1@1@9360@1.
어떻게 고치는 지 오류 2723 (| 개체가 시도한 작업을 지원하지 않습니다.) - | 개체가 시도한 작업을 지원하지 않습니다.@OLE 개체가 그림으로 변경되었거나 개체에 대한 링크가 끊어졌습니다.@작업을 수행하려면 OLE 개체를 삭제한 다음 포함하거나 다시 연결하십시오. @1@1@9360@1.
Como corrigir o Erro 2723 (O | objeto não suporta a operação tentada) - O | o objeto não suporta a operação tentada. @ O objeto OLE foi alterado para uma imagem ou o link para o objeto foi quebrado. @ Se você deseja executar a operação, exclua o objeto OLE e, em seguida, incorpore ou vincule-o novamente. @ 1 @ 1 @ 9360 @ 1.
Hur man åtgärdar Fel 2723 (Den | objektet stöder inte den försökte åtgärden) - Den | objektet stöder inte den försökta åtgärden.@OLE -objektet ändrades till en bild eller länken till objektet bröts.@Om du vill utföra åtgärden tar du bort OLE -objektet och sedan inbädda eller länka det igen. @1@1@9360@1.
Как исправить Ошибка 2723 (| объект не поддерживает предпринятую операцию) - | объект не поддерживает предпринятую операцию. @ Объект OLE был изменен на изображение, или ссылка на объект была разорвана. @ Если вы хотите выполнить операцию, удалите объект OLE, а затем вставьте или свяжите его снова. @ 1 @ 1 @ 9360 @ 1.
Jak naprawić Błąd 2723 (| obiekt nie obsługuje próby operacji) - | obiekt nie obsługuje próby wykonania operacji.@Obiekt OLE został zmieniony na obraz lub łącze do obiektu zostało zerwane.@Jeśli chcesz wykonać operację, usuń obiekt OLE, a następnie ponownie go osadź lub połącz. @1@1@9360@1.
Cómo arreglar Error 2723 (El | el objeto no admite la operación intentada) - El | el objeto no admite la operación intentada. @ El objeto OLE se cambió a una imagen, o el enlace al objeto se rompió. @ Si desea realizar la operación, elimine el objeto OLE y luego incruste o vincule de nuevo. @ 1 @ 1 @ 9360 @ 1.

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: