How to fix the Runtime Code 2511 The action or method requires a Specification Name argument

Symptoms of Code 2511 - The action or method requires a Specification Name argument

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The action or method requires a Specification Name argument - Code 2511

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2511 (Die Aktion oder Methode erfordert ein Argument für den Spezifikationsnamen) - Die Aktion oder Methode erfordert ein Spezifikationsname-Argument.@Sie haben versucht, die TransferText-Aktion oder -Methode zu verwenden und Sie haben ein Übertragungstyp-Argument angegeben, aber das Spezifikationsname-Argument leer gelassen.@Geben Sie im Spezifikationsname-Argument eine vorhandene
Come fissare Errore 2511 (L'azione o il metodo richiede un argomento Nome specifica) - L'azione o il metodo richiede un argomento Nome specifica.@Hai provato a utilizzare l'azione o il metodo TrasferisciTesto e hai specificato un argomento Tipo di trasferimento ma hai lasciato vuoto l'argomento Nome specifica.@Nell'argomento Nome specifica, inserisci un
Hoe maak je Fout 2511 (De actie of methode vereist een argument Specificatienaam) - De actie of methode vereist een argument Specificatienaam.@U hebt geprobeerd de actie of methode TransferText te gebruiken en u hebt een argument Overdrachtstype opgegeven, maar hebt het argument Specificatienaam leeg gelaten.@Voer in het argument Specificatienaam een ​​bestaand
Comment réparer Erreur 2511 (L'action ou la méthode nécessite un argument Nom de spécification) - L'action ou la méthode requiert un argument Nom de la spécification.@Vous avez essayé d'utiliser l'action ou la méthode TransferText et vous avez spécifié un argument Type de transfert, mais vous avez laissé l'argument Nom de la spécification vide.@Dans l'argument Nom de la spécification, saisissez un
어떻게 고치는 지 오류 2511 (작업 또는 메서드에는 사양 이름 인수가 필요합니다.) - 작업 또는 방법에는 사양 이름 인수가 필요합니다.@TransferText 작업 또는 방법을 사용하려고 하고 전송 유형 인수를 지정했지만 사양 이름 인수를 비워 둡니다.@사양 이름 인수에 기존 항목을 입력하십시오.
Como corrigir o Erro 2511 (A ação ou método requer um argumento Nome de Especificação) - A ação ou método requer um argumento Nome da Especificação. @ Você tentou usar a ação ou método TransferirTexto e especificou um argumento Tipo de Transferência, mas deixou o argumento Nome da Especificação em branco. @ No argumento Nome da Especificação, insira um existente
Hur man åtgärdar Fel 2511 (Åtgärden eller metoden kräver ett Specification Name-argument) - Åtgärden eller metoden kräver ett specifikationsnamnargument.@Du försökte använda åtgärden eller metoden TransferText och du angav ett argument för överföringstyp men lämnade argumentet Specifikationsnamn tomt.@I argumentet Specifikationsnamn anger du en existin
Как исправить Ошибка 2511 (Действие или метод требует аргумента имени спецификации.) - Для действия или метода требуется аргумент «Имя спецификации». @ Вы пытались использовать действие или метод TransferText и указали аргумент «Тип передачи», но оставили поле «Имя спецификации» пустым. @ В аргументе «Имя спецификации» введите существующий
Jak naprawić Błąd 2511 (Akcja lub metoda wymaga argumentu Nazwa specyfikacji) - Akcja lub metoda wymaga argumentu Nazwa specyfikacji.@Próbowałeś użyć akcji lub metody PrzenieśTekst i określiłeś argument Typ przesyłania, ale pozostawiłeś argument Nazwa specyfikacji pusty.@W argumencie Nazwa specyfikacji wprowadź istniejący
Cómo arreglar Error 2511 (La acción o el método requiere un argumento Nombre de especificación) - La acción o el método requiere un argumento Nombre de especificación. @ Intentó utilizar la acción o método Transferir texto y especificó un argumento Tipo de transferencia pero dejó en blanco el argumento Nombre de especificación. @ En el argumento Nombre de especificación, ingrese un

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: