How to fix the Runtime Code 2458 The control number you specified is greater than the number of controls

Symptoms of Code 2458 - The control number you specified is greater than the number of controls

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The control number you specified is greater than the number of controls - Code 2458

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

Method 1 - Close Conflicting Programs

up vote 0 down vote

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

• Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
• Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
• You will need to observe if the error message will reoccur each time you stop a process.
• Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 - Update / Reinstall Conflicting Programs

up vote 0 down vote

Using Control Panel

• For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
• For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
• For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
• Once inside Programs and Features, click the problem program and click Update or Uninstall.
• If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application's installation disk to reinstall the program.

Using Other Methods

• For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
• For Windows 10, you may click Start, then Settings, then choose Apps.
• Scroll down to see the list of Apps and features installed in your computer.
• Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 - Update your Virus protection program or download and install the latest Windows Update

up vote 0 down vote

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 - Re-install Runtime Libraries

up vote 0 down vote

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

• Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
• Click Uninstall on top of the list, and when it is done, reboot your computer.
• Download the latest redistributable package from Microsoft then install it.

Method 5 - Run Disk Cleanup

up vote 0 down vote

You might also be experiencing runtime error because of a very low free space on your computer.

• You should consider backing up your files and freeing up space on your hard drive
• You can also clear your cache and reboot your computer
• You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
• Click Properties and then click Disk Cleanup

Method 6 - Reinstall Your Graphics Driver

up vote 0 down vote

If the error is related to a bad graphics driver, then you may do the following:

• Open your Device Manager, locate the graphics driver
• Right click the video card driver then click uninstall, then restart your computer

Method 7 - IE related Runtime Error

up vote 0 down vote

If the error you are getting is related to the Internet Explorer, you may do the following:

1. Reset your browser.
• For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
• For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
2. Disable script debugging and error notifications.
• On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
• Put a check mark on the radio button
• At the same time, uncheck the "Display a Notification about every Script Error" item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.

Other languages:

Wie beheben Fehler 2458 (Die von Ihnen angegebene Kontrollnummer ist größer als die Anzahl der Kontrollen) - Die von Ihnen angegebene Kontrollnummer ist größer als die Anzahl der Kontrollen.@Verwenden Sie die Count-Eigenschaft, um die Kontrollen im Formular oder Bericht zu zählen, und überprüfen Sie dann, ob die von Ihnen angegebene Kontrollnummer im Bereich der vorhandenen Kontrollen liegt.@@1@4@ 2019460@1.
Come fissare Errore 2458 (Il numero di controllo specificato è maggiore del numero di controlli) - Il numero di controllo specificato è maggiore del numero di controlli.@Utilizzare la proprietà Count per contare i controlli nel modulo o nel report e quindi verificare che il numero di controllo citato rientri nell'intervallo dei controlli esistenti.@@1@4@ 2019460@1.
Hoe maak je Fout 2458 (Het door u opgegeven controlenummer is groter dan het aantal controles) - Het controlegetal dat u hebt opgegeven, is groter dan het aantal controles.@Gebruik de eigenschap Count om de controles op het formulier of rapport te tellen en controleer vervolgens of het controlegetal dat u aanhaalt binnen het bereik van de bestaande controles valt.@@1@4@ 2019460@1.
Comment réparer Erreur 2458 (Le numéro de contrôle que vous avez spécifié est supérieur au nombre de contrôles) - Le numéro de contrôle que vous avez spécifié est supérieur au nombre de contrôles.@Utilisez la propriété Count pour compter les contrôles sur le formulaire ou l'état, puis vérifiez que le numéro de contrôle que vous citez se trouve dans la plage des contrôles existants.@@1@4@ 2019460@1.
어떻게 고치는 지 오류 2458 (지정한 제어 번호가 제어 수보다 큽니다.) - 지정한 컨트롤 번호가 컨트롤 수보다 큽니다.@Count 속성을 사용하여 폼이나 보고서의 컨트롤을 계산한 다음 인용한 컨트롤 번호가 기존 컨트롤의 범위 내에 있는지 확인합니다.@@1@4@ 2019460@1.
Como corrigir o Erro 2458 (O número de controle que você especificou é maior do que o número de controles) - O número de controle que você especificou é maior do que o número de controles. @ Use a propriedade Count para contar os controles no formulário ou relatório e, em seguida, verifique se o número de controle citado está dentro do intervalo dos controles existentes. @@ 1 @ 4 @ 2019460 @ 1.
Hur man åtgärdar Fel 2458 (Kontrollnumret du angav är större än antalet kontroller) - Kontrollnumret du angav är större än antalet kontroller.@Använd egenskapen Count för att räkna kontrollerna i formuläret eller rapporten och kontrollera sedan att kontrollnumret du anger ligger inom intervallet för befintliga kontroller. @@ 1@4@ 2019460@1.
Как исправить Ошибка 2458 (Указанный вами контрольный номер больше, чем количество контрольных элементов.) - Указанный вами контрольный номер больше, чем количество элементов управления. @ Используйте свойство Count для подсчета элементов управления в форме или отчете, а затем убедитесь, что указанный вами контрольный номер находится в пределах диапазона существующих элементов управления. @@ 1 @ 4 @ 2019460 @ 1.
Jak naprawić Błąd 2458 (Podany numer kontrolny jest większy niż liczba kontrolek) - Określony numer kontrolny jest większy niż liczba kontrolek.@Użyj właściwości Count, aby policzyć kontrolki w formularzu lub raporcie, a następnie sprawdź, czy numer kontrolki, który cytujesz, mieści się w zakresie istniejących kontrolek.@@1@4@ 2019460@1.
Cómo arreglar Error 2458 (El número de control que especificó es mayor que el número de controles) - El número de control que especificó es mayor que el número de controles. @ Utilice la propiedad Count para contar los controles en el formulario o informe y luego verifique que el número de control que cita está dentro del rango de controles existentes. @@ 1 @ 4 @ 2019460 @ 1.

About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: