Error: Code 0x11B - The DRIVER_RETURNED_HOLDING_CANCEL_LOCK bug check has a value of 0x0000011B. This bug check indicates that a driver has returned from a cancel routine that holds the global cancel lock. This causes all later cancellation calls to fail, and results in eith


This article discusses Error Code 0x11B, also known as DRIVER_RETURNED_HOLDING_CANCEL_LOCK and according to Microsoft it means The DRIVER_RETURNED_HOLDING_CANCEL_LOCK bug check has a value of 0x0000011B. This bug check indicates that a driver has returned from a cancel routine that holds the global cancel lock. This causes all later cancellation calls to fail, and results in eith

About BSOD

What is a BSOD and why do so many numbers flash onscreen during this error? The reason computers crash like this is due to the level of severity of this type of error.

This error is a total system failure that renders your computer unusable or inaccessible for a time. The latter part of the name itself suggests how critical the failure was, Blue Screen of Death. Although, while a BSOD will usually completely crash your system, there are BSODs that will still let you access your Desktop.

Some BSODs are software related, others are due to hardware failure. Software related issues may not require as extreme solutions compared to hardware BSODs, that may involve purchasing new parts for the computer, but they can still be difficult to resolve because they will normally involve backing up files and running several repair tools.

Hardware related stop errors on the other hand, should really only need hardware replacement, so unless you are replacing the hard drive or the motherboard, your problem may be considered simpler and easier to resolve.

Definitions (Beta)

Here we list some definitions for the words contained in your error, in an attempt to help you understand your problem. This is a work in progress, so sometimes we might define the word incorrectly, so feel free to skip this section!

  • Cancellation - Cancellation is paradigm that allows cooperatively canceling a running operation before it finishes.
  • Driver - Device driver or software driver is a computer program allowing higher-level computer programs to interact with a hardware device
  • Global - Refers to a space where variables and other items may be accessed from any scope.
  • Lock - Locking allows different types of resources to be used exclusively by one process at a time.


BSODs are rather obvious, you just get a completely blue screen with a bunch of words and numbers telling you something caused the failure. It is a sudden and unexpected event which happens without warning.

Hardware related BSODs happen instantaneously when your hardware fails. The BSOD stays on the screen, and sometimes reboots in a loop without any possibilities of logging into the desktop.

Software related BSODs may or may not do the same, but they sometimes just appear a few minutes after booting up, allowing the user to get a glimpse of the error code.

Nevertheless, you are not entirely helpless when you receive a BSOD. You get an error code which you can use to identify the part of the computer which caused the failure.

(For illustrative purposes only)

Those that experience software related BSODs notice a difference in computer operation as the affected computer sometimes becomes sluggish when processing or suddenly shuts down. Users may also experience glitches and unless a different issue manifests at the same time you are getting the BSOD, you can say that it is a symptoms of BSOD.


BSODs are generally caused either by faulty hardware or software corruption. Hardware failure can be caused by overheating, power supply issues, incompatibilities or bad memory.

On the other hand, software related BSODs are results of timing inconsistency, driver incompatibility and operating system corruption. Not all software related BSODs stop you from accessing your desktop. When you receive an update that messes up your computer, you will experience processing failures at different instances while accessing your computer.

Repair Methods

Repairing BSODs can be a bit tricky, as they can be caused by many different reasons, but once you properly identify the problem, the steps are mostly straightforward. Here are known troubleshooting techniques you can try to help get rid of your Blue Screen error.

You should follow these four steps before attempting any repair method:

  • Take note of the error code and other information that was displayed when you got the Blue Screen.
  • Try to recall the last action you did on your computer before the error occurred.
  • Remove peripherals that are not critical to normal operations.
  • Reboot your computer to check if you can log into your desktop.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither nor it's writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page - you complete these steps at your own risk.

If you can log into your desktop normally or via Safe Mode, you should be able to access the Windows update tool and run it to get the latest available updates for your system. The troubleshooting process is a bit different for each version of the operating system, so follow the sections related to your operating system.
For Windows 7 Systems:
  1. Open Windows Update by clicking the Start button.
  2. Type Update in the search box, and click Windows Update.
  3. This will open the Windows Update window and you'll be able to see Check for updates on the left panel, click it to check the latest updates for your computer.
  4. If you see a message telling you that updates are available, or telling you to review updates, then select the relevant updates and click OK.
  5. Click Install updates. You will be prompted to accept license, then just do that. Then it will require admin permission to make changes, just allow by either running as administrator or by keying in the password.
Windows 8:
  1. Open Settings by either:
    1. Holding down the Windows key on your keyboard beside the left Ctrl button, then pressing the X key, then choose Command prompt and type "wuauclt /showcheckforupdates" on the prompt. 1. Otherwise, you may also move your cursor to the right side of your screen so you may see the and then click the gear icon to open Settings. You will then see a new tab appear and at the bottom, you may click "Change PC Settings" to open a new window. There, you can click Windows update on the menu at the left side. It will open Windows update, where you can click the "Check for updates now" button. Run it by clicking the button and then, when it is done, click Install Updates and wait for the process to finish.
    2. Reboot your computer to check if the error will still occur.
Windows 10:
  1. You can update via Device Manager or by accessing computer Settings.
  2. For the first method, type Device Manager on the Search box.
  3. In reference with the error code you received, check for updates for the driver that is causing the issue by right clicking it and choosing Update Driver.
  4. The second method would be to type Update on your Search box. Select Check for Updates download and install updates.
  5. Once done, restart your computer to complete the update process.
Another way to find faulty software programs or drivers is to scan your device performance and health. This utility is not a part of Windows Defender, however for earlier versions, you do the scanning in Device Manager since that is the only place in Windows 7 and 8 where you are provided a tool for scanning components. Here are the methods to run this tool.
For Windows 7, Vista and Windows 8:
  • To scan devices would be to go to Device manager, right click Devices and select Scan for Hardware changes. This lets you check if your computer is having issues running a device with a certain driver.
For Windows 10:
  • Open Windows Defender and click Device performance and health.
  • Check for any listed issues with your updates, storage and drivers.
  • If there are any issues detected, you can Repair Reinstall your Windows operating system so that you don't lose your files. You can repair reinstall your computer by either clicking Additional info under Fresh Start in Windows Defender and following the prompt or by using the OS CD and instead of doing a clean installation, by following the Repair my Computer option.
Since virus attacks can cause BSOD, removing them online can be very difficult. The best way to run a full scan to remove virus infection is to run it offline. Follow these steps to do that:
For Windows 7 and 8:
  • You can run Windows Defender offline by creating a bootable disk or flash drive.
  • You will need to download either the 32bit or 64bit version of Windows Defender offline. You'll be able to check which one you need by going to Start and right clicking on Computer, then open properties to see your Windows version.
  • Once downloaded, you'll need to run either the msstool32.exe or msstool64.exe in order toto burn your cd or save on flash disk. Just remember that if you are using a flash disk, the creator tool will reformat your flash disk so any file on the disk will be lost.
  • Place the media on the computer you need to scan and then reboot your computer. You might need to access your BIOS to change boot device, or you may just need to access your boot device menu to allow booting to the cd or flash drive.
  • Once the process is done, you will need to reboot your computer normally. Check if you are still having the same issue.
For Windows 10:
  • After receiving a BSOD, you may get a notification from Windows Defender you that your system may need additional cleaning. If that happens, you should perform and offline check of your computer to see if there are malware infections.
  • Start by opening your computer Settings. Go to Security and open Windows Defender. You can run a full scan by clicking Scan Offline.
You possiblymay have recently installed software that could be causing your computer to crash with a BSOD. In case you accidentally downloaded a file or program that caused harm to your computer, you may uninstall the problem program in any Windows version this way:
  • Type Control Panel on the search box and click the result.
  • Once inside control panel, click Uninstall a program.
  • You will see on the Programs and Features window the list of all installed programs. Look for the ones that are installed just before you received the BSOD warning, right click the item and click Uninstall. Follow the direction to uninstall and then reboot your computer to see if the BSOD will come up again.
Computer peripherals are necessary for other purposes like printing, scanning, photo input, drawing, extending video and other activities.
When you connect a device to your computer, BSODs sometimes appear.
  • When this happens, remove the external hardware first. Update your computer using the method we just tackled. Problems did not happen prior to connecting the device, so unplugging the device will help you get back to your desktop without problems.
  • If you know that the device is in good condition, however, and you have tested it with a different device, you would want to keep using it. To make sure the BSOD doesn't happen again updates either your Microsoft software by running Windows Update or your device drivers by downloading from the manufacturer.
  • Uninstalling and reinstalling the device driver may also work, so try going to Device Manager too. Uninstall the device and reboot your computer. This should install a fresh copy of your device driver when your computer restarts.
You can perform this simple troubleshooting step in any Windows version in two different ways.
Method 1
  • You can type Power Options on the search box, then press enter key.
  • Click Choose what the power buttons do on the left side.
  • Locate and change the status of Turn on fast startup under Shutdown settings. That is, turn it off if it is on, or turn it on if it is off, then click Save changes.

Method 2
  • Type Command Prompt on search box. Run it on an elevated command line by right clicking and then choosing Run as administrator.
  • Once inside Command Prompt, type powercfg -h off and then click enter. Exit to desktop and see if the problem persists.
For Windows 7:
  • Since BSOD that doesn't let you boot to Windows reboots in a cycle, you may try to interrupt the process by clicking F8. From the next screen, you will be able to log in using Safe Mode.
  • Search for Windows Updates then click enter when it comes up on the search results. Check recent updates and click Uninstall updates on recent dates when the error began happening.
For Windows 8 and Windows 10
  • Press the window key and the letter C simultaneously to open Settings.
  • A slider tab will appear on the right side where you will see Settings on top and some icons at the bottom.
  • Choose Power, click Shift together with Restart.
  • This will allow you to boot to Windows repair items.
  • Click troubleshoot then go to Advanced Options.
  • Inside the next window, click Startup Settings. You will see a Restart button, just click it and it will boot you to advanced boot device where you can choose the boot utility.
  • The choices are numbered so just click the number of the item that you wish to boot into.
  • Once there, go to Windows update by searching for it. And do the same process of removing recently installed updates.
You may repair your computer by restoring settings to an earlier date. There are several ways to do this.
Restore In Windows 7:
  • Click Start and type System Restore on the search box, then click enter key.
  • When the System Restore window appears, click Next until you get to the window where you can choose a restore point. You will see a list of restore dates with the description.
  • Then click Next again and confirm restore process. Wait for it to stop processing and you get a window where you can click the Finish button. Close the window and let your computer reboot.
You may also restore your computer using the OS installation disk.
  • To do that boot to OS CD or Recovery Media.
  • Follow the prompt until you get to the screen where it gives you the option Repair My Computer, click and choose System Restore from the list of recovery tools.
  • You can choose any restore point on the System Restore window, but make sure you restore to a date which you know your computer is working fine.
  • Wait till the process finish and let your computer reboot to the Desktop.
You may also boot to Safe Mode.
  • Boot your computer and click F8. Choose Safe Mode with Command Prompt by clicking the keyboard arrows to move the highlight down to that item.
  • Once in Safe Mode, Type rstrui.exe and hit enter on command prompt. Follow the restore wizard and reboot your computer normally.
Restore in Windows 8:
Restore inside Windows environment
  • While in Windows 8, Click the search icon and type System Restore.
  • Keep clicking Next till you get to the window where you can select the restore date.
  • Confirm restoration by following the remaining steps. After it is done, reboot your computer normally.
Restore at Boot
  • Reboot your computer and tap F11 to start System Recovery
  • You will see Advanced Options screen, and you will find System Restore in it.
  • It will prompt you to choose the Administrator account, just choose and log into your admin account.
  • Hit Next button until you get to the screen that allows you to choose restore dates.
  • Keep pressing next button until you get to the end of the restore process and you see the Finish button.
  • Reboot computer normally.
Restore in Windows 10:
Inside windows environment
  • Run System Restore by typing it on the Search box. Click on the item that will come up on the search results.
  • When System Restore window opens, click Next until you are given a list to choose restore date, choose the one that you know works best for you.
  • Confirm the process by Next, then yes then finally Finish. Reboot your computer after closing the window.
Using the installation media
  • If you cannot boot into windows, then you're better off downloading the Media Creator file from Microsoft. Create boot disk using a DVD or a flash disk.
  • Once done, reboot your computer and access your BIOS to change boot device to either your DVD or your flash disk.
  • When you get to the installation screen, go to Troubleshoot > Advanced Options > System Restore and perform the process the same way.
Other languages:

Wie beheben Fehler 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - Die Fehlerprüfung DRIVER_RETURNED_HOLDING_CANCEL_LOCK hat den Wert 0x0000011B. Diese Fehlerprüfung zeigt an, dass ein Treiber von einer Abbruchroutine zurückgekehrt ist, die die globale Abbruchsperre hält. Dies führt dazu, dass alle späteren Abbruchaufrufe fehlschlagen, und führt dazu, dass entweder
Come fissare Errore 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - Il controllo bug DRIVER_RETURNED_HOLDING_CANCEL_LOCK ha un valore di 0x00000011B. Questo controllo bug indica che un driver è tornato da una routine di annullamento che contiene il blocco di annullamento globale. Ciò fa sì che tutte le chiamate di annullamento successive falliscano e si traduca in uno dei due
Hoe maak je Fout 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - De DRIVER_RETURNED_HOLDING_CANCEL_LOCK bugcontrole heeft een waarde van 0x0000011B. Deze foutcontrole geeft aan dat een stuurprogramma is teruggekeerd van een annuleringsroutine die de algemene annuleringsvergrendeling bevat. Dit zorgt ervoor dat alle latere annuleringsoproepen mislukken, en resulteert in ofwel:
Comment réparer Erreur 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - La vérification de bogue DRIVER_RETURNED_HOLDING_CANCEL_LOCK a une valeur de 0x0000011B. Cette vérification de bogue indique qu'un pilote est revenu d'une routine d'annulation qui détient le verrou d'annulation global. Cela provoque l'échec de tous les appels d'annulation ultérieurs et entraîne eith
어떻게 고치는 지 오류 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - DRIVER_RETURNED_HOLDING_CANCEL_LOCK 버그 검사의 값은 0x0000011B입니다. 이 버그 검사는 드라이버가 전역 취소 잠금을 보유하는 취소 루틴에서 반환되었음을 나타냅니다. 이로 인해 이후의 모든 취소 호출이 실패하고 다음 중 하나가 발생합니다.
Como corrigir o Erro 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - A verificação de bug DRIVER_RETURNED_HOLDING_CANCEL_LOCK tem um valor de 0x0000011B. Esta verificação de bug indica que um driver retornou de uma rotina de cancelamento que contém o bloqueio de cancelamento global. Isso faz com que todas as chamadas de cancelamento posteriores falhem e resulta em
Hur man åtgärdar Fel 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - Felkontrollen DRIVER_RETURNED_HOLDING_CANCEL_LOCK har ett värde på 0x0000011B. Denna felkontroll indikerar att en förare har återvänt från en avbokningsrutin som har det globala avbrytningslåset. Detta gör att alla senare avbokningsanrop misslyckas och resulterar i eith
Как исправить Ошибка 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - Проверка ошибки DRIVER_RETURNED_HOLDING_CANCEL_LOCK имеет значение 0x0000011B. Эта проверка на ошибку указывает, что драйвер вернулся из процедуры отмены, которая удерживает глобальную блокировку отмены. Это приводит к сбою всех последующих вызовов отмены и приводит к тому, что eith
Jak naprawić Błąd 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - Sprawdzanie błędów DRIVER_RETURNED_HOLDING_CANCEL_LOCK ma wartość 0x0000011B. To sprawdzenie błędów wskazuje, że sterownik powrócił z procedury anulowania, która utrzymuje globalną blokadę anulowania. Powoduje to, że wszystkie późniejsze wywołania anulowania kończą się niepowodzeniem i skutkują eith
Cómo arreglar Error 0x11B (DRIVER_RETURNED_HOLDING_CANCEL_LOCK) - La comprobación de errores DRIVER_RETURNED_HOLDING_CANCEL_LOCK tiene un valor de 0x0000011B. Esta comprobación de errores indica que un controlador ha regresado de una rutina de cancelación que mantiene el bloqueo de cancelación global. Esto hace que todas las llamadas de cancelación posteriores fallen y da como resultado

The Author About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki.

Follow Us: Facebook Youtube Twitter
Last Updated:
16/09/21 02:12 : A Android user voted that repair method 1 worked for them.

Recommended Repair Tool:

This repair tool can fix common computer problems such as blue screens, crashes and freezes, missing DLL files, as well as repair malware/virus damage and more by replacing damaged and missing system files.

Click Here to Download and install the Windows repair tool.

Click on Start Scan and let it analyze your device.

Click on Repair All to fix all of the issues it detected.



1 Ghz CPU, 512 MB RAM, 40 GB HDD
This download offers unlimited scans of your Windows PC for free. Full system repairs start at $19.95.

Article ID: ACX01404EN

Applies To: Windows 10, Windows 8.1, Windows 7, Windows Vista, Windows XP, Windows 2000

Help someone else with this error and Share This Page:
Email Facebook Google LinkedIn Print Twitter

Speed Up Tip #8

Disable Fancy Windows Visual Effects:

If you care about speed more than aesthetics you can always disable those fancy visual effects in Windows. You can do that by going to the Performance Options in your Windows Advanced System Settings. Simply, tick off those fancy buttons, sliding menus, and glossy icons to increase your computer's performance.

Click Here for another way to speed up your Windows PC
Home     Blog     About     Privacy Policy     Contact Us

Errors in Alphabetical Order:  A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Microsoft & Windows® logos are registered trademarks of Microsoft. Disclaimer: is not affiliated with Microsoft, nor does it claim such affiliation. This page may contain definitions from under the CC-BY-SA license. The information on this page is provided for informational purposes only. © Copyright 2018